Oxidative Methyl Esterification of Primary Alcohols with Iodine‐Mediated Poly[4‐(Diacetoxyiodo)Styrene]

An operationally simple oxidative methyl esterification of primary alcohols in good yields using an iodine‐mediated poly[4‐(diacetoxyiodo)styrene] in methanol at room temperature is described. The polymeric reagent can be regenerated and reused as an environmentally benign reagent.     

CuI催化的酰胺和溴苯的偶联反应研究

本文报道了一种新的催化体系 (CuI / 氨基酸 / K₃PO₄) 催化胺和芳香溴代化合物之间的交叉偶联反应，对于不同的底物都以较好的产率得到了产物。该反应操作简单，适用性广，并且试剂价格便宜。     

Controlling the size of nanostructures in thin films via blending of block copolymers and homopolymers

The effects of molecular weight and concentration of poly (methyl methacrylate) (PMMA) homopolymer or symmetric short polystyrene-block-poly (methyl methacrylate) (PS-b-PMMA) diblock copolymer on the size of the nanostructures of its blends with symmetric long PS-b-PMMA diblock copolymer have been investigated by atomic force microscopy. By careful controlling of the film thickness, solvent selectivity, and annealing time, PMMA cylindrical microdomains oriented normal to the film surface were obtained in all thin films. With the addition of both low- and high-molecular-weight PMMA homopolymers, the cylindrical domain sizes increased although it was less obvious for the lower molecular weight homopolymer. In contrast to the homopolymer, adding the short chain diblock copolymer resulted in a decrease in the cylindrical domain size, which was ascribed to the reduction of the interfacial tension and increase in the stretching energy.     

A preliminary study on fabrication of nanoscale fibrous chitosan membranes in situ by biospecific degradation

A new approach for in situ fabrication of nanoscale fibrous chitosan membrane by biospecific degradation under physiological situation was studied. The chitosan binary blend membranes were fabricated by solvent casting of chitosan solution containing highly deacetylated chitosan (HDC) and moderately deacetylated chitosan (MDC) with different ratio. The biodegradation process was performed in PBS (pH 7.4) containing lysozyme at the temperature of 37 °C. Experimental results from weight loss, reducing sugar in surrounding media, FT-IR, X-ray diffraction, gel permeation chromatography (GPC) and SEM throughout the study showed that the biospecific degradation by lysozyme had removed MDC component selectively. When the ratio of MDC in the binary blend membranes amounted to 0.5, nanoscale domains of HDC and MDC were obtained, and thus a nanoscale fibrous structure was fabricated after biospecific degradation of MDC. This nanofibrous structure and the biospecific degradation of chitosan membranes can have potential advantages and interesting implications in tissue engineering and drug delivery.     

Observations on the swelling characteristics of the zwitterionic hydrogel of poly(1-3-sulfopropyl)-2-vinyl-pyridinium-betaine hydrogel

Samples of poly[1-(3-sulfopropyl)-2-vinyl-pyridinium-betaine] (PSPV) have been synthesized to high conversion by free radical polymerization in aqueous solution of the zwitterionic monomer SPV with several concentrations of the crosslinker N,N′-methylene-bis-acrylamide (MBA). The densities of the resultant xerogels increased regularly with the content of MBA. Hydrogels obtained by swelling them in water and aqueous KSCN solution were examined by gravimetric and dimensional analysis. The water contents increased with decreasing content of MBA, the value of 92.7 wt% at the lowest MBA content being higher than that for other zwitterionic hydrogels. Enhanced swelling occurred in 1 M aq. KSCN at each MBA content, the total swelling being 98.1 wt% at the lowest crosslinker content. Swelling increased with increasing temperature. An approximate procedure to formulating swelling equilibrium in term of the volume fraction of water in hydrogel, in conjunction with the van’t Hoff equation, yields a small positive value for the enthalpy of swelling. This is compared with values derived similarly for other hydrogels.     

An efficient synthesis of novel spiro[[8H]indeno[2,1-b]-thiophene-8,9′-fluorene] building block for blue light-emitting materials

We have developed efficient synthetic routes to obtain a novel building block spiro[[8H]indeno[2,1-b]thiophene-8,9′-fluorene] (SITF), a monothiophene-containing spirobifluorene analogue, and constructed blue light-emitting materials, including 2′,7′-bis([1,1′-biphenyl]-4-yl)-spiro[indeno[2,1-b]thiophene-8,9′-fluorene] (BBP-SITF) and 2′,7′-bis(9,9′-spirobifluoren-2-yl)spiro[[8H]indeno[2,1-b]-thiophene-8,9′-fluorene] (BSBF-SITF). BSBF-SITF has shown to be a stable blue light-emitting material with high PL quantum efficiency (89%) and unique regioselective feature at the C2 of thiophene, which indicate that BSBF-SITF will be useful for constructing complicated optoelectronic systems.     

Direct Synthesis, Crystal Structure and Thermal Kinetics of Supramolecular Complex [Co（H2O）6]·（Hnip）2·（H2nip）2·（DMA）2·（H2O）8 （nip=5-nitroisophthalate, DMA=CH3NHCH3）

The crystal of [Co（H2O）6]·（Hnip）2·（H2nip）2·（OMA）2·（H2O）8 has been cultured using direct method and characterized by X-ray single crystal diffractometry, elemental analysis and FTIR spectroscopy. It crystallizes in triclinic system, P-1 space group with the cell parameters of a=0.7012（1） nm, b=1.1378（2） nm, c=1.6612（3） nm, α= 84.92（3）°, β=85.19（3）°, γ=85.91（3）°, V= 1.3128（5） nm^3, Z=1, Dc= 1.573 g·cm^-3. Final R indices [1〉2σ（I）] are： R1 =0.0279, wR2=0.0765 while R indices for all data are： R1 =0.0327, wR2=0.0806. The Co coordination octahadra are each surrounded by two Hnip, two H2nip, two DMA and eight water molecules that are linked by hydrogen bonds and π-π stacking interactions. Thermal analyses of DSC and TG-DTG have been performed on the complex to predict its thermal decomposition mechanism and determine the most probable kinetic model function using Kissinger, Ozawa, integral and differential methods.     

Extremely facile ring inversion and rearrangement in fluorobicyclo[2.1.0]pentanes

cis-1,2,3,4,5,5-Hexafluorobicyclo[2.1.0]pentane and 1,2,4,5-tetrafluorobicyclo[2.1.0]pentane have been synthesized from hexafluorobenzene. The former hydrofluorocarbon, which exists entirely in the endo configuration, rearranges to cis-1,2,3,3,4,5-hexafluorocyclopentene below room temperature (E_a = 21.9 kcal/mol, log A = 13.4). The latter undergoes degenerate ring inversion with extraordinary ease (ΔG^‡ = 6.8 ± 0.2 kcal/mol at −55 °C). Density functional calculations indicate that significant bonding between the bridgehead carbons is retained in the ring inversion transition state. Analogous calculations predict for hexafluorobicyclo[1.1.0]butane a considerably lower barrier for ring inversion and more 1,3-bonding in the transition state.     

单臂冠醚液晶LB膜的相变研究

研究了两种单臂冠醚液晶及配合物(1, 2及1.Eu^3^+)的LB膜的成膜特性,实验发出它们均可在气-液界面形成单分子膜, 但不易转移, 化合物1在压膜过程中出现一维相变。用CPK模型对成膜分子构型和面积进行估算, 其结果与实验相一致, 并讨论了冠醚液晶结构对LB膜相变的影响。     

Studies on Liquid/liquid Extraction of Copper Ion with Room Temperature Ionic Liquid

Room temperature ionic liquids are regarded as “Green solvents” for their nonvolatile and thermally stable properties. They are employed to replace traditional volatile organic solvents in organic synthesis, solvent extraction, and electrochemistry. In this work, a water immiscible room temperature ionic liquid, 1‐butyl‐3‐methylimidazolium hexafluorophosphate [C₄mim][PF₆], was used as an alternative solvent for liquid/liquid extraction of copper ions. Metal chelators, including dithizone, 8‐hydroxyquinoline, and 1‐(2‐pyridylazo)‐2‐naphthol, were employed to form neutral metal‐chelate complexes with copper ions so that copper ions were extracted from aqueous solution into [C₄mim][PF₆]. The parameters that affect the extraction of copper ions with this biphasic system were investigated. The extraction behavior in this novel biphasic system is shown to be consistent with that of traditional solvents. For example, the extraction with this biphasic system is strongly pH dependent. So, the extraction efficiency of coppers ion from an aqueous phase can be manipulated by tailoring the pH value of the extraction system. Hence, the extraction, separation and preconcentraction of copper ions can be accomplished by controlling the pH value of the extraction system. It appears that the use of ionic liquid as an alternate solvent system in liquid/liquid extraction of copper ions is very promising.